Can You Use WD40 On Bike Chain? How to Use It?
Can you use Wd-40 on bike chain? How effective is WD-40 as a bike chain lubricant? The answer is complicated, and it depends on the type of bike you have, how frequently you ride, and what kind of weather you ride in regularly. Having said that, many people have utilized it successfully for this reason.
This article will teach you all you need to know about using WD-40 to lubricate your bike chain. We’ll go through the advantages and disadvantages of utilizing it, as well as which bikes it can assist and how to utilize it on your chain.
So, can you use Wd-40 on bike chain? Let’s find out!
Can You Use WD-40 on Bike Chain?
Can you use Wd-40 on a bike chain? Yes, you can use WD-40 on a bike chain because it protects metal surfaces from rust and corrosion by removing moisture that would otherwise cause them to deteriorate due to exposure.
However, because WD-40’s primary job isn’t lubrication, using it as a bike chain lube is a different story. As a result, it doesn’t perform as well as other bike lubricants. To gain a better grasp of what it is and why it was made, you must first understand what it is and why it was created.
What Is WD-40?
The silicon lubricant WD-40 (Water Displacement Formula Experiment # 40) was created by the Rocket Chemical Company in 1953. The major goal of this product was to prevent metal parts from corroding when they were exposed to water for a lengthy period of time without being adequately dried and lubricated, such as rain or sea spray.
When Is It Best to Use WD-40 On A Bike Chain?
The definition of WD-40 makes it clear that lubricating a bike chain isn’t a top priority. Keep in mind that it only lasts 8 to 12 hours if you use it as a lubricant. As a result, WD-40 isn’t the best long-term lubricant.
When you consider the costs, an 18-ounce bottle of WD-40 will set you back around $10, and you’ll have to reapply it considerably more regularly. A good bike chain lube, on the other hand, will cost around the same and last significantly longer. You won’t need to lube them as often as you would if you used WD40.
As a result, cleaning your bike chain before lubricating it with WD-40 is recommended. WD-40 may also be used to remove dirt, grime, and grease from your chain and derailleurs’ surfaces. WD-40 can also be used to keep rust at bay during wet or cold weather.
Why Shouldn’t You Use WD-40 to Lubricate Your Bike Chain?
1. WD-40 is not a chain lubricant; it is a water-displacing chemical.
2. In the long term, WD-40 will not protect the metal surfaces of your bike’s chain and gears.
3. WD-40’s oil collects dirt and dust particles, clogging your transmission.
4. You’ll have to reapply it more frequently than you would if you used a good bike chain lube.
How to Use WD-40 On A Bike Chain?
1. Spray the bike chain with WD-40.
2. Using a rag or paper towel, wipe away any excess.
3. Allow ten minutes for it to cool before wiping it clean.
4. Use bike chain lube to lubricate the chain.
Conclusion
Can you use Wd-40 on bike chain? Yes, you can. You have been provided with all the information you need to know.
Wd-40 protects your bike metal surfaces from rust and corrosion. Keeps it always shining. Your bike chain is now safe even after being exposed to water.
Hope we helped you.
