How To Remove Bike Crank Without Puller?

How to remove bike crank without puller? We got you.

The smoothest and butteriest rides are the most delightful. A rusted bike crank, on the other hand, may detract from the enjoyment of riding a bike. Believe me when I say that riding with a malfunctioning crank is a horrible experience. So, learning how to remove bicycle cranks is a requirement before that happens, which is unavoidable.

In this article, we’ll show you how to remove a bike crank apart without a puller so you may clean, repair, or replace it on the fly.

Anyone who needs a quick crank repair but doesn’t have a crank puller can benefit from these instructions. They’ll remove the cranks from any bike. Furthermore, visiting your local bike repair will not cost you any further money.

Let’s move forward towards answering the question, “how to remove bike crank without puller?”

How To Remove Bike Crank Without A Puller?

Without a puller, removing bicycle cranks is rather simple. It takes only a few minutes to complete and requires little to no mechanical skills. However, because you risk damaging the bike, it should only be utilized as a last resort in a situation where you don’t have access to an expert. So, if you don’t have any other options, you can quickly remove a bike crank without using a puller by following these 9 simple steps.

1. Wear Hand Protection

The most basic rule to follow before working on any mechanical parts is to protect your hands. Putting on some gloves is the most effective way to accomplish this.

This precaution is taken not only to protect your hands from the crank but also to keep moving pieces like the chain from injuring you. Your hands are subject to harm if you keep them out in the open. As a result, taking this preventative measure should be the first and most critical step before moving on to the others.

If you don’t have gloves on hand, shifting the chain to the outside gear with an object is a simple way to safeguard your hand. Alternatively, you might use the gear shifter to change gears.

2. Taking Out the Crank Bolt

This step allows you to remove the crankset from your bicycle. Simply turn the nut or bolt on the crank in the opposite direction. After releasing the bolt, you’ll be able to remove the crankset. To get to the crank, you’ll need to take a few more steps after you’ve removed the crankset.

This action, on the other hand, must be taken with prudence. It’s likely that your bike’s chain will fall free and strike your hand. It’s best not to rush through this level and instead take it carefully. To begin, remove any dust covers that may be obscuring your bike’s crank bolt. You can pry it out with your fingers or a card if you don’t use tools; otherwise, you risk harming them.

3. Separate the Washer from the Crank

To remove the crank arm without a crank puller, detach the washer from the cranks in this step. You can easily remove the washers from under the nuts of the cranks using a spanner tool.

If you’re unfamiliar with the term “washer,” it’s a small metal disc with a hole in the center. This washer’s main function is to distribute the load on a nut’s threads and keep it from loosening. It also aids in directing the vehicle in one direction.

4. Now Check the Crank Bolt

Crank bolts and nuts are available in a range of sizes. The crank bolt must be removed before the right tool can be used to remove it.

If your bike’s crank has an M8 crank bolt, you’ll need something with a little tip. A CPW-7 or a CCP-22 would be suitable for this job.

A CCP-44 or something similar with a larger point is necessary for a larger crank bolt, such as an M12 or M14.

5. Turn the Threaded Coupler

After you’ve chosen the right tool, carefully turn the threaded coupler. Rotate until the hex tool and bolt are completely recessed. Allowing it to cross the thread, though, may cause damage to the surface.

To do this properly, you’ll need a screwdriver or a spanner.

6. Threading the Puller’s Spindle Driver

After completely rotating the threaded coupler, thread the spindle driver of the puller into the arms. You’ll need to be extra cautious because you’ll be using more of your arm’s strength.

All that’s left to do now is slide the spindle driver into the provided slot. Then turn it in an anti-clockwise direction. The crank’s tension or tautness can be tested. Tighten it if it’s still loose.

7. Turning the Spindle In A Clockwise Motion

Start twisting the spindle driver clockwise once it’s sufficiently tightened. This method allows you to completely separate the crank arms. This procedure, on the other hand, should be followed carefully and steadily.

8. Unthreading the Crank Arm Puller Tool

Simply unthread the crank puller tool from the crank once the crankset has been removed. If you’re not careful with this step, you might damage yourself. As a result, ensure that you take the necessary safeguards.

9. Repeat the Same Process to Remove Bike Crank Without A Puller On the Opposite Crank

After you’ve figured out how to remove the crank from one side of the bike, you can easily remove it from the other. Simply ensure that you take the same safeguards and pay attention to the precautions. You don’t want to injure yourself or damage the bike.

FAQs

What Is The Purpose Of A Crank Puller?

A crank puller is a tool designed expressly for removing a bike’s crank. Any type of crank, including splined and square cranks, can be removed with this tool.

What Is The Best Bike Crank Length?

The type of bike and the discipline for which it will be used decide the ideal crank length. You’ll need a shorter crank if you want to go downhill on your bicycle. A long crank, on the other hand, is preferred if you wish to use it for long distances because it is more efficient.

What Is the Difference Between a 172.5 & 175 Crank?

The main difference between a 175 and a 172.56 crank is its length. The efficiency of the 175 is higher than that of the 172.5.

Conclusion

How to remove bike crank without puller? Following these simple procedures, you may now remove the bike crank without the use of any special tools, such as a crank puller. These procedures are simple to carry out and may be accomplished by anyone with the help of a few basic tools. You can always seek professional help if you’re having trouble removing the crank.